大长径比固体火箭发动机点火瞬态过程数值分析

研究大长径比固体火箭发动机点火瞬态特性,采用守恒型N S方程描述了集点火器、燃烧室和喷管于一体的数学仿真模型,应用NND-3差分格式进行数值求解,计算结果表明,点火期间,发动机内除了压强急升之外,还存在振荡和拍击现象。     

Directional change‐point detection for process control with multivariate categorical data

Most modern processes involve multiple quality characteristics that are all measured on attribute levels, and their overall quality is determined by these characteristics simultaneously. The characteristic factors usually correlate with each other, making multivariate categorical control techniques a must. We study Phase I analysis of multivariate categorical processes (MCPs) to identify the presence of change‐points in the reference dataset. A directional change‐point detection method based on log‐linear models is proposed. The method exploits directional shift information and integrates MCPs into the unified framework of multivariate binomial and multivariate multinomial distributions. A diagnostic scheme for identifying the change‐point location and the shift direction is also suggested. Numerical simulations are conducted to demonstrate the detection effectiveness and the diagnostic accuracy.© 2013 Wiley Periodicals, Inc. Naval Research Logistics, 2013     

Counterinsurgency force ratio: strategic utility or nominal necessity

As a consequence of intervention in Iraq and Afghanistan, force ratio for counterinsurgency (COIN) has come under increased scrutiny. Reduced to its essence, the issue is simply, ‘How many troops does it take to get the job done?’ This answer has been sought by the US military, academia, and think tanks. There have been numerous responses, culminating in several ‘plug-and-play’ equations for minimum force ratios in COIN operations. Due to the impossibility of determining precisely how many insurgent forces there are, it has become common to base force ratios on the population of the country. In the realm of policy, the question above is posed as, ‘How many of our troops does it take to get the job done?’     

装药长径比对EFP成型作用效果影响分析

针对装药长径比对EFP成型的影响,基于一种球缺型药型罩EFP,利用ANSYS／LS-DYNA仿真软件对其成型过程进行建模仿真,研究EFP成型过程及其各项参数．在该基础上,改变装药高度得到不同的装药长径比数据,并对不同长径比EFP形成过程进行仿真,得到不同装药长径比EFP的速度、速度增长率及炸药能量利用率等数据,为选择最佳装药长径比提供依据．     

空对地攻击武器选用方法

空对地攻击中能否正确选用空对地武器,将直接影响空对地攻击的效果.讨论了一般的空对地武器选用原则和依据,并用概率论的方法建立了选用空地武器的效损比模型,最后给出具体算例说明模型在实际作战任务中的应用.     

伞盘结构对大长径比发动机药柱结构完整性的影响

为了提高大长径比发动机药柱结构完整性水平,基于三维黏弹性有限元法,计算某大长径比固体发动机在温度和内压荷载联合作用下的结构响应;研究伞盘结构及其位置对药柱最大Von Mises应变的影响规律;讨论当伞盘位于药柱中部时,伞盘最大Von Mises应变随伞盘宽度、深度以及顶部圆弧半径比的变化规律。结果表明,伞盘位于药柱中部时可以有效地降低大长径比药柱的最大Von Mises应变,增加伞盘宽度、深度或选取合适的半径比均可降低伞盘结构的最大Von Mises应变。所得结论可为固体发动机设计提供参考。     

基于SPRT的组合导航故障检测与隔离互辅算法

针对SPRT(序贯概率比检验)算法无法准确判断缓变故障结束时间的问题,提出了一种故障检测与隔离互辅算法。采用SPRT算法对滤波残差进行故障检测,确认故障后隔离故障观测量,重新建立卡尔曼滤波观测方程并完成量测更新,将隔离后的滤波结果作为下一时刻的滤波初值辅助故障检测。仿真结果表明,该方法能准确定位故障观测量并判断出故障的结束时间,提高了系统可靠性。     

粘弹性泊松比的各种表述方法

本文讨论线性粘弹泊松比的四种表述法:微分算子法、遗传积分法、复数表示法和经验表示法的实用价值和问题。为固体推进剂力学性态的描述提供了方便。     

气液同轴式喷嘴缩进比对雾化细度影响的实验

缩进比是液体火箭发动机气液同轴式喷嘴设计中一个重要参数。本文对缩进比对喷嘴雾化特性的影响进行了实验研究。结果表明;在不同工作参数下不同缩进比的喷嘴,其雾化特性有一定的差别。缩进比对雾化细度的影响不如其对雾化的流强和混合比分布及噪声等的影响明显。在气侧压降较小时,缩进比过大过小都不利于雾化;而在气侧压降较大时,缩进比较大或较小都会对雾化有一定的改善。但当缩进比过大时,气液之间的相互作用会使得液体喷注压降明显地波动。     

火炮身管寿命的分布函数

本文运用可靠性理论和《130mm 加农炮剩余寿命的一种预测模型》一文的结果,证明火炮身管寿命服从 Weibull 分布,并以130mm 加农炮为实例,给出参数的比值估计方法.